Application Instructions

• Please follow all instructions.

• Keep in mind that vinyl lettering must be applied correctly the first time.

• Do not touch the sticky side of the vinyl.

• Apply to outside of windshield or other object non-porous surface.

• Throughly clean the surface to which the vinyl is being applied. (Window cleaner works well.)

• The surface must be completely dry and free of debree.

• Measure and mark area before beginning to apply vinyl.

• Peel tape underneath design slowly and carefully.

• Apply in one direction such as left to right, being careful to apply consistent pressure.

• Before removing outer tape, ensure proper adhesion by raking design thoroughly from the
  center out with the flat edge of a credit card until all edges are pressed.

• Slowly remove transfer tape in one direction, pulling slowly to the side rather than up.

• As you peel the transfer tape check vinyl for peeling.

 

 Usage Considerations

• Decals are intended to be applied only once.

• Attempting to remove or adjust vinyl once it is applied will damage it.

• Application mistakes are not warranted.

• Use may cause damage to tinted windows and other similar layered or painted surfaces.

• Customer assumes all risk of property damage associated with the application and removal
  of this product.

• With proper installation, vinyl is made to withstand outdoor weather conditions for up
  to 7 years.

• Take care when washing around vinyl applications as damage may occur. Avoid contact
  with solvents.